Gang Sheet Auto Builder

Please ensure that your design(s) fit 297 x 1000 mm,/ 29.7cm x 100cm in dimension.

At JDA Designs we offer a convenient print-on-demand service for DTF (Direct-to-Film) printed garments and clothing. This service allows you to provide DTF printed products to your customers without the need for investing in or maintaining your own DTF direct-to-film printer. Here's how the process works:

• Upload Artwork: You can upload your design artwork. The artwork should be in PNG file format, using RGB colour mode, with a high resolution of 300 DPI preferred. The design should have a transparent background, and any white areas in the design should be left as white (hex code FFFFFF). There's no need to mirror the image manually, as the software will automatically handle this.

• Printing Process: JDA Design Studio will use specialised DTF inks to print your design onto a PET film. The DTF inks ensure vibrant and durable prints. The printing is done onto DTF PET film.

• Powder and Curing: After printing, the printed PET film is treated with DTF adhesive powder. This step is important for ensuring proper adhesion and longevity of the print. The powder-coated film is then cured, which involves applying heat to set the ink and adhesive powder.

• Dispatch: Once the printing, powdering, and curing processes are complete, the DTF PET film transfer sheet is dispatched to you. You'll receive the printed transfer sheets ready for the next steps.

• Transfer Process: Upon receiving the transfer sheets, you'll need to cut them to the desired size and use a heat press to apply them to garments. The recommended heat pressing instructions are as follows:
  1. Heat press at 160°C for 30 seconds.
  2. Allow the garment to cool for 90 seconds.
  3. Peel off the film to reveal the transferred design.
  4. Apply a DTF/ Teflon finishing sheet over the transferred design.
  5. Heat press again at 160°C for 10 seconds to finish the process.

• Washing Instructions: To ensure the longevity of the printed design, it is recommended to follow these washing instructions:
  1. Wash garments at 30°C using a quick wash cycle.
  2. Turn the garment inside-out before washing.
  3. Do not tumble dry.

Important Notes:

• Artwork must be owned or approved by you, and any copyright infringement will result in the removal of the design from prints with no refund.
• It's recommended to provide artwork without embedded colour profiles to help achieve the best colour matching. Keep in mind that colours on the printed transfer sheet may vary slightly from those shown on screen due to differences in display screens.

To utilise this service, you can place an order and email your artwork to fia@jdadesignstudio-dtf.com ensuring you include your order number and that your artwork conforms to the specified requirements.

Please note that this description is based on the provided information and is not an official representation by JDA Design Studio. Make sure to verify details and terms directly with us if you decide to use our services.